This in-the-hoop project is for bibles with the following dimensions:
4 ¾ x 6 7/8 x ¾”. (The cover will accommodate a bible up to 5x7 as
well.) Be sure to check your bible’s dimensions before purchasing this
design. Examples of this type of bible is the NKJV Pocket Bible, NCV
Pocket Bible. The bible cover is done in 3 hoopings in 5x7 hoops:
You will construct the front first, then the back with pocket, and then
in the last hooping you will combine the two parts by stitching a cover
spine. It is not hard to do. Just follow the instructions listed in the
enclosed pdf document carefully. Lots of photos included.
The decorative cross design is part of the cover. The cover has a
convenient back pocket for a pen and a small notepad, as well as an
elastic strap that holds the bible shut when not in use.