Cutwork Christmas Tree - Richelieu Embroidery Design
Cutwork designs are very popular as embellishments on apparel and for home decor, such as linens, table runners, doilies, stockings etc. For a Christmas project you can turn a simple stocking into a unique item! The design can be embroidered as a cutwork design or an applique. You need water soluble stabilizer for stitching this project. Cutwork is very similar to applique. Design can be done in both ways. If you will add additional fabric - it will be applique, but if fabric is trimmed away instead of being added - it will be cutwork. No stocking pattern is included. See actual size below.

Cutwork Christmas Tree - Richelieu Embroidery Design


Share
Merchant Click here to see all designs by
Art Embroidery
Price 19.90
File Formats DST EXP HUS JEF PEC PES VIP VP3 XXX

Cutwork designs are very popular as embellishments on apparel and for home decor, such as linens, table runners, doilies, stockings etc.
For a Christmas project you can turn a simple stocking into a unique item!

The design can be embroidered as a cutwork design or an applique.
You need water soluble stabilizer for stitching this project.
Cutwork is very similar to applique. Design can be done in both ways. If you will add additional fabric - it will be applique, but if fabric is trimmed away instead of being added - it will be cutwork.
No stocking pattern is included. See actual size below.

You might also like

Teddy Angel, Old Toy - 2 Sizes!

$8.00

Angel and Bunny Set, Old Toy

$9.90

Serving Stocking - 6x10

$15.00

Cutwork Edge Motive, Richelieu Machine Embroidery Design - 5x7

$14.90

Products Specs

Product Specs
Finish Size 5.14" x 6.10"
Stitch Count 25569

Tags

cutwork, Christmas, holidays, tree, in the hoop, applique

Terms of Use

  • This product may be used to create limited products for sale. Bulk product manufacturing is not permitted.
  • Stocking project not included.

Special Note:

How to do Machine Embroidered Cutwork:

  1. Hoop together water-soluble mesh stabilizer and the fabric.
  2. Run machine and stitch Color 1 to join fabric and stabilizer.
  3. Stitch Color 2. Zigzag will indicate the area where fabric will need to be cut away.
  4. Remove the hoop from the machine and leave everything in the hoop. Place the hoop on a flat surface and carefully trim the fabric away from the inside of zigzag stitches.
    Cut away only fabric layer, don't cut water-soluble stabilizer. Do not push on the stabilizer when trimming. If the stabilizer becomes loose, the cutwork stitching will not line up properly.
  5. Place the hoop back on the machine and stitch Color 3. Machine will do bridges across edges of the cutwork section.
  6. Stitch Color 4. Finish stitching.
  7. Remove embroidery from the hoop, trim away excess water-soluble stabilizer, and soak in the water. Lay it flat, let it dry and press (from the wrong/left side) if necessary.